Being a single source supplier for automation technology, We provides what customers in the water market require.
- Solutions that best match the industry specific application requirement
-Products that functionally fit the requirements of the water market, including internationally recognized calibration facilities and material certifications.
- Products that are easy to commission and install savingtime and expense during a start-up.
- Equipment that can be diagnosed remotely, resulting intime and personnel savings.
- High accuracy and reliability with a minimal investment.
- Automation services emphasizing optimized product usage and care throughout the entire life cycle.
we have sound expertise in the designing, assembling, delivery, and servicing of filters, air scrubbers. We use innovative biotechnology and plant on the cutting edge of technology as a key for air purification and odor removal.
Our Modular Containerized filter Systems consist of one to four double walled filter containers to treat airflow rates in a range of 300 cfm to 7,000 cfm. The outer wall is made of steel with a treated and painted outer surface. The inner surfaces are coated with 3 mm heavy-duty polyethylene.
The system is solidly constructed and operates automatically with practically no need for maintenance.
Force behind the successful introduction of the high speed blower technology in the market in IRAQ. Our focused approach to sound product introduction with emphasis on technical competency, high product quality, product demonstration and proximity of customer service has led to wide acceptance of our high speed air blower product by the industry.
PENSTOCKSare available in numerous designs an for all different kinds of applications.
Common types of actuation range from manual solutions like hand cranks or hand wheels to electrical, hydraulical or pneumatic systems.
STOP LOGS are the most economical solution to shut down channels. Depending on dimension and water load different materials like aluminum, stainless steel or steel with relevant coatings are used.
COMPACT SYSTEM
The gas condensing system combines condensing boiler and hot water tank in a compact unit. This not only saves energy, but also plenty of space. So the system is by its low height of only 1.35 m and 1.67 m as roof heating system for one-to three-family homes. Especially frugal comes to with precious energy. The combination of stratified storage and condensing boiler you have a low energy consumption and the highest hot water comfort and the integrated high-efficiency pumps reduce power consumption significantly. This also saves money and protects the environment.
VALVES
We have a facility to provide complete range valves, hydrants and accessories for the water and gas distribution network, sewage treatment and fire protection. Furthermore, AL JENOOBOIA has built up strong brands supplying valves and controls for water treatment, dams & reservoirs, HVAC, chemical processing, marine and other industrial sectors. Our products are designed to the major international standards. When dealing with the AL JENOOBIA expect quality, reliability, functionality and long lifetime in service.
Our products range from the toughest applications in commercial & Industrial water, waste water, agriculture – irrigation, fish farming and fire fighting water applications. Our broad product range and application experience ensure the right solution that meets your specific needs. Our reliable, high-quality products deliver clog-free pumping with unmatched up-time for your peace of mind.
الجنوبية للمياه ؤالطاقة المستدامة
we have sound expertise in the manufacturing, assembling, delivery, installation and servicing of electrical panels. We partner with Developers, Consultants, MEP Contractors and Manufacturing industries in providing electrical engineering solutions to our clients in the Construction, Manufacturing and Oil & Gas industries.
We have a facility to provide complete range transformer products supported by a team of qualified, skilled and dedicated Engineers, technicians, supervisors and quality control. We can provide special type transformers dry type and Oil immersed types as per the requirement of customers.
Welding Technology Division
AL JENOOBIA has the perfect solution for every application area. From compact MMA welding machines, MIG/MAG and TIG applications to complex automated welding systems. In addition there are new technologies for cutting and spot welding. The secret of its lead in innovation: all products are developed in collaboration with those who use them.
This means that all products are matured, tested in real-life situations, reliable &
user-friendly.
We offers a wide range of waste water screening products to suit any installation conditions, flow rate or bar spacing. Mechanical Preliminary Treatment forms the first part of waste water treatment both for Sewage Treatment Plant (STP) inlets and other fields of application, such as process water treatment. For this initial step, screens of various types are used.
Depending on the bar spacing of the screens, floating and suspended materials of varying sizes such as stones, vegetable peels, fibrous materials etc. are removed. This preliminary treatment helps in optimizing the subsequent steps and preventing damage of the equipments used thereafter.
AL JENOOBIA WATER & SUSTAINABLE ENERGY
TRANSFORMERS
Distribution Transformers Power Transformers Special Transformers
Efficient solid/liquid separation is guaranteed by our well-known centrifuge technology. Our portfolio covers many different types, like baffle ring, peeler, screen and solid bowl or vibrating basket centrifuges.Separator Solid bowl centrifuge Sreen scroll centrifuge Peeler centrifuges Horizontal peeler centrifuge Vertical peeler centrifuge Gypsum Vertical peeler centrifuge Flip-Top Pusher centrifuges.
In a round clarifier basin, the following types of scrapers can be used:
bottom scraper, suction scraper with a vacuum pump, or suction scraper with a submersible pump. The scraper bridge has a truss construction and dimensioned according to the dimensions of the basin.
These scrapers are normally used for sand traps and preliminary clarifier basins. Like for the spiral scrapers, either scraper plates or suction scrapers can be installed. They are operated either by conventional means (wheels and rollers) or by one of three alternatives for nonslip drive.
Main Distribution Boards / LV Panels Motor Control Centers Sub-Main Distribution Boards
Consumer Distribution Boards Capacitor Bank Panels for Automatic Power Factor Correction
Automatic Mains Failure Changeover PanelsFeeder Pillars for street lighting control
Metering Cabinets PLC & Automation Panels Pump Control Panels
Conventional DOL / Wye,Delta Starters Variable Frequency Drived Panels
ARC WELDING MIG/MAG POWER SOURCES TIG POWER SOURCES ELECTRODE POWER SOURCES
MIG/MAG WELDING TORCHES TIG WELDING TORCHES LASER WELDING RESISTANCE WELDING
PLASMA WELDING WELDING ACCESSORIES WELDING CONSUMABLES
AL JENOOBIA specializes in Machines, Machine components, and special structures made from stainless steel for water treatment plants.
Our service extends from design to construction to installation.
Centrifugal Pumps
Centrifugal pumps are constructed from rugged, corrosion resistant materials including heavy gauge stainless steel and plastics specifically engineered for maximum corrosion resistance. Pumps are available in either vertical or horizontal configurations, either mechanically sealed or magnetically coupled for sealless operation. Mag drive pumps feature high-powered, rare earth magnetic couplings which allow the transmission of maximum horsepower.
Drum / Barrel Pumps
Powered, portable drum pumps are designed to provide safe and easy transfer of a wide range of fluids including difficult to handle liquids such as acids, bases and solvents. Containers are quickly filled or emptied without spills or splashes. Many different models and pump tube lengths are available to satisfy diverse customer requirements.
Gravity thickeners are used reduce the volume of sludge. Gravity thickeners are dimensioned and constructed according the requirements with respect to the dry matter concentration and the dimensions of the settling basin. We design gravity thickeners with direct flanged axel as well as ones with two motors and ball-bearing connections.
A sand separator is used to separate sand from the sand/water mixture in the sand trap. Depending on the requirements.
Channels/troughs are either round or polygon-shaped. Weirs and flotation baffles are dimensioned according to DIN 19558. The troughs are dimensioned according to the hydraulic specifications. Especially the buoyancy of submerged troughs is to be considered.
Turbo Blowers Rotary lobe compressors Positive Displacement Blowers
CAPACITIES FROM 5.0 G / HOUR TO 20 KG/ HOUR
Handling, transport and storage of chlorine for water disinfection is a challenge to systems engineering. This is the reason why the our principle has been used in dosing systems for a long time already. The pressure of the chlorine gas is reduced to the vacuum. This methods successfully avoids chlorine gas leakage. In the event of a pipe breakage,no chlorine gas can escape, only ambient air is drawn.Vacuum chlorine gas dosing systems are composed of two principal components.
DIESEL GENERATORS
STATIONARY AND MOBILE DIESEL GENERATING SETS FOR EMERGENCY POWER, PEAK LOAD SUPPLY AND CONTINUOUS OPERATION FROM 2-8000 KVA, We Supply manual, electrical or compressed air started diesel generator sets. Depending on the customer’s wish we can deliver the air or liquid cooled stationary, mobile, or silenced units installed in steel containers, precast concrete stations or weatherproof canopies made from steel or aluminium.Our units come with service tank and double bearing alternator with flexible coupling fitted as standard. Diesel engine, alternator and front end radiator are installed together on a welded steel frame with vibration damping. Depending on the design the switchgear can be found either directly on the unit or is positioned separately inside or outside the unit room. For special applications the units can be fitted with e.g. heat exchangers or exhaust gas after treatment (catalytic converter, particle filter). Of course if you need engines running on bio diesel,vegetable oil or natural gas we can design this into the unit. We will gladly take on design for co-generation units, which are equipped with the required engines.
MEASURING, CONTROLLERS & RECORDERS
Electromagnetic Flow Meter Variable Area Flow Ultrasonic Open Channel Flow Meter Vortex/swirl Flow Meter
Mass Flow Meter Residual Chlorine Ammonia Conductivity pH Phosphate Redox
Turbidity Partially filled pipe Flow Meter Pressure Dissolved oxygen
Fluoride Thermal Mass Flow Meter Temperature Dissolved Organic
Commercial-water Commercial-treatment Commercial-fire-fighting Light industry-water Light industry-treatment Agriculture-irrigation Golf/turf-irrigation Municipality-water Municipality-HVAC Water supply to civil Agricultural and industrial Pressure boosting Fire-fighting Heating systems Air-conditioning
Industrial liquids Irrigation Refrigeration Swimming pools Emptying Washing plants
Sprinkler systems Hydrant systems Deluge systems Monitor systems Water curtain
WALL HEATERS
Optimal energy efficiency and lowest emissions by real combustion control Highest thermal comfort through sensor-based self-monitoring and self-adaptation of the heating system Standard integrated to 26 kW high-efficiency pump Forward-looking and eligible system design by combining possibility of condensing technology with solar heating and / or ventilation systems with heat recovery.
BOILERS
The gas boiler is specifically tailored to the requirements of one-, two-and multi-family homes. With its large water content, it is the ideal solution for the modernization and meets the highest standards of comfort in the new building.